ZENEC RCE3501 ZE-E> GO Rearview CITROEN C5
€115.43 119 *
-
Product number:ZE-RCE3501
-
Delivery time:2-3 Tage
-
EAN:7612309402961
-
Manufacturer:
-
Versandfrei
-
PayPal -3%
ZENEC RCE3501 ZE-E> GO Rearview CITROEN C5
Specific vehicle rear view camera for the following models:
- C5 (2008 -)
Multimedia Specialist Zenec expanded its range of accessories by 15 vehicle-specific backup cameras, which are perfect for the major European vehicle models. The cameras replace the factory license plate light assembly and can be installed in minutes. The installation is very simple, without the hassle of cutting or drilling: Remove only the license plate light, camera install, pulling wires forward for or naviceiver Moni - done. The original vehicle appearance is retained, and an unobtrusive installation possible. Faster and easier to monitor navigation and multimedia systems can not be retrofitted with a rear-view camera.
ZENEC's new vehicle-specific cameras can be connected to all Moniceiver, naviceiver and connect your monitors that have a rear camera input. The fully integrated into the vehicle cameras provide a sharp, high-resolution image, even under difficult lighting conditions, and provide at all times a perfect view of all the obstacles behind the vehicle. Once the reverse gear is engaged, will turn on the camera and transmits images of the situation behind the car on the monitor or Naviceiverdisplay - a huge relief when parking or vehicles, where the view is more difficult to rear.
Zenec used for its cameras only the best components: For example, very high-quality MPEG-board, which guarantees an excellent signal processing - as quickly and smoothly as is possible today. In addition to the signal processing allows the image sensor itself, which determines the image quality of a camera. The new cameras Zenec CMOS sensors are used because they have lower noise at low light levels than CCD sensors. In addition to the significantly greater operating temperature range of CMOS technology, which is why these automotive sector generally has the lead. The use of Zenec CMOS sensor from Sharp ensures sharp images and also works with very chilly -20 ° C without any failures.
Due to the very high light sensitivity of 0.3 Lux allow new Zenec cameras a clear view even in low light or at night. In combination with the high resolution, SNR> 48 dB and a wide horizontal viewing angle of 170 ° is always provided for an excellent overview of the close range behind the vehicle.
Features
Camera System: 6.4 mm/1/4 "CMOS sensor with 510 x 496 pixels resolution
TV System: NTSC
Horizontal Viewing Angle: 170 °
Output signal: 420 TV lines
Minimum brightness: 0.3 lux
Auto white balance
Splash-proof housing (IP66)
Operating temperature: -10 ° C to +50 ° C
Relative Humidity: 95% Max
Video output: 1.0 Vp-p, 75 ohms
Power supply: DC 12 V ± 1 V
Specific vehicle rear view camera for the following models:
- C5 (2008 -)
Multimedia Specialist Zenec expanded its range of accessories by 15 vehicle-specific backup cameras, which are perfect for the major European vehicle models. The cameras replace the factory license plate light assembly and can be installed in minutes. The installation is very simple, without the hassle of cutting or drilling: Remove only the license plate light, camera install, pulling wires forward for or naviceiver Moni - done. The original vehicle appearance is retained, and an unobtrusive installation possible. Faster and easier to monitor navigation and multimedia systems can not be retrofitted with a rear-view camera.
ZENEC's new vehicle-specific cameras can be connected to all Moniceiver, naviceiver and connect your monitors that have a rear camera input. The fully integrated into the vehicle cameras provide a sharp, high-resolution image, even under difficult lighting conditions, and provide at all times a perfect view of all the obstacles behind the vehicle. Once the reverse gear is engaged, will turn on the camera and transmits images of the situation behind the car on the monitor or Naviceiverdisplay - a huge relief when parking or vehicles, where the view is more difficult to rear.
Zenec used for its cameras only the best components: For example, very high-quality MPEG-board, which guarantees an excellent signal processing - as quickly and smoothly as is possible today. In addition to the signal processing allows the image sensor itself, which determines the image quality of a camera. The new cameras Zenec CMOS sensors are used because they have lower noise at low light levels than CCD sensors. In addition to the significantly greater operating temperature range of CMOS technology, which is why these automotive sector generally has the lead. The use of Zenec CMOS sensor from Sharp ensures sharp images and also works with very chilly -20 ° C without any failures.
Due to the very high light sensitivity of 0.3 Lux allow new Zenec cameras a clear view even in low light or at night. In combination with the high resolution, SNR> 48 dB and a wide horizontal viewing angle of 170 ° is always provided for an excellent overview of the close range behind the vehicle.
Features
Camera System: 6.4 mm/1/4 "CMOS sensor with 510 x 496 pixels resolution
TV System: NTSC
Horizontal Viewing Angle: 170 °
Output signal: 420 TV lines
Minimum brightness: 0.3 lux
Auto white balance
Splash-proof housing (IP66)
Operating temperature: -10 ° C to +50 ° C
Relative Humidity: 95% Max
Video output: 1.0 Vp-p, 75 ohms
Power supply: DC 12 V ± 1 V
Product information "ZENEC RCE3501 ZE-E> GO Rearview CITROEN C5 "
ZENEC RCE3501 ZE-E> GO Rearview CITROEN C5
Specific vehicle rear view camera for the following models:
- C5 (2008 -)
Multimedia Specialist Zenec expanded its range of accessories by 15 vehicle-specific backup cameras, which are perfect for the major European vehicle models. The cameras replace the factory license plate light assembly and can be installed in minutes. The installation is very simple, without the hassle of cutting or drilling: Remove only the license plate light, camera install, pulling wires forward for or naviceiver Moni - done. The original vehicle appearance is retained, and an unobtrusive installation possible. Faster and easier to monitor navigation and multimedia systems can not be retrofitted with a rear-view camera.
ZENEC's new vehicle-specific cameras can be connected to all Moniceiver, naviceiver and connect your monitors that have a rear camera input. The fully integrated into the vehicle cameras provide a sharp, high-resolution image, even under difficult lighting conditions, and provide at all times a perfect view of all the obstacles behind the vehicle. Once the reverse gear is engaged, will turn on the camera and transmits images of the situation behind the car on the monitor or Naviceiverdisplay - a huge relief when parking or vehicles, where the view is more difficult to rear.
Zenec used for its cameras only the best components: For example, very high-quality MPEG-board, which guarantees an excellent signal processing - as quickly and smoothly as is possible today. In addition to the signal processing allows the image sensor itself, which determines the image quality of a camera. The new cameras Zenec CMOS sensors are used because they have lower noise at low light levels than CCD sensors. In addition to the significantly greater operating temperature range of CMOS technology, which is why these automotive sector generally has the lead. The use of Zenec CMOS sensor from Sharp ensures sharp images and also works with very chilly -20 ° C without any failures.
Due to the very high light sensitivity of 0.3 Lux allow new Zenec cameras a clear view even in low light or at night. In combination with the high resolution, SNR> 48 dB and a wide horizontal viewing angle of 170 ° is always provided for an excellent overview of the close range behind the vehicle.
Features
Camera System: 6.4 mm/1/4 "CMOS sensor with 510 x 496 pixels resolution
TV System: NTSC
Horizontal Viewing Angle: 170 °
Output signal: 420 TV lines
Minimum brightness: 0.3 lux
Auto white balance
Splash-proof housing (IP66)
Operating temperature: -10 ° C to +50 ° C
Relative Humidity: 95% Max
Video output: 1.0 Vp-p, 75 ohms
Power supply: DC 12 V ± 1 V
Specific vehicle rear view camera for the following models:
- C5 (2008 -)
Multimedia Specialist Zenec expanded its range of accessories by 15 vehicle-specific backup cameras, which are perfect for the major European vehicle models. The cameras replace the factory license plate light assembly and can be installed in minutes. The installation is very simple, without the hassle of cutting or drilling: Remove only the license plate light, camera install, pulling wires forward for or naviceiver Moni - done. The original vehicle appearance is retained, and an unobtrusive installation possible. Faster and easier to monitor navigation and multimedia systems can not be retrofitted with a rear-view camera.
ZENEC's new vehicle-specific cameras can be connected to all Moniceiver, naviceiver and connect your monitors that have a rear camera input. The fully integrated into the vehicle cameras provide a sharp, high-resolution image, even under difficult lighting conditions, and provide at all times a perfect view of all the obstacles behind the vehicle. Once the reverse gear is engaged, will turn on the camera and transmits images of the situation behind the car on the monitor or Naviceiverdisplay - a huge relief when parking or vehicles, where the view is more difficult to rear.
Zenec used for its cameras only the best components: For example, very high-quality MPEG-board, which guarantees an excellent signal processing - as quickly and smoothly as is possible today. In addition to the signal processing allows the image sensor itself, which determines the image quality of a camera. The new cameras Zenec CMOS sensors are used because they have lower noise at low light levels than CCD sensors. In addition to the significantly greater operating temperature range of CMOS technology, which is why these automotive sector generally has the lead. The use of Zenec CMOS sensor from Sharp ensures sharp images and also works with very chilly -20 ° C without any failures.
Due to the very high light sensitivity of 0.3 Lux allow new Zenec cameras a clear view even in low light or at night. In combination with the high resolution, SNR> 48 dB and a wide horizontal viewing angle of 170 ° is always provided for an excellent overview of the close range behind the vehicle.
Features
Camera System: 6.4 mm/1/4 "CMOS sensor with 510 x 496 pixels resolution
TV System: NTSC
Horizontal Viewing Angle: 170 °
Output signal: 420 TV lines
Minimum brightness: 0.3 lux
Auto white balance
Splash-proof housing (IP66)
Operating temperature: -10 ° C to +50 ° C
Relative Humidity: 95% Max
Video output: 1.0 Vp-p, 75 ohms
Power supply: DC 12 V ± 1 V
- Citroen
Login
VORKASSE 5%
(für ausgewählte Produkte)
REKLAMATIONEN & REPARATUR
PAYPAL SKONTO 3%
(für ausgewählte Produkte)